Water is hard? Solutions to the problem. Water softening in USA


What to do if the water is hard: solutions to the problem

What if the water is hard? Soften or leave as is? The debate about it has not subsided, and there are currently two directly opposing views.

What to do if the water is too hard, everyone can decide for themselves. But in order to make the right choice, you have to at least know what the hardness is and what the consequences can be if the water exceeds its norm.

So, how to determine that the water is too hard, and then what to do? Here are some symptoms of high stiffness:

  • household heaters - kettles, boilers, dishwashers and washing machines - break down regularly;
  • faucets and showerheads constantly produce white limescale;
  • on freshly brewed tea, a thin film of white can be seen from above;
  • after the water has stayed in the glass jar for a while, white flake deposits are visible at the bottom of the jar;
  • when washing in the washing machine, you have to activate the additional rinse mode, and still can't get rid of the presence of detergent on laundry and clothes;
  • the faucets on the faucets are constantly leaking because the gasket has become unusable again;
  • after washing, the skin flakes and itches unpleasantly.

And if you answered positively to at least three points, it means that your water is too hard and you need to do something to remedy the situation.

Solutions for water softening in USA:

So, what if the water is hard?

The answer seems obvious - install a softener water filter. But there are some pitfalls here, too. First of all, you need to know which system is suitable for this or that case, because the degree of hardness of water can be different. And if you take a not too productive device, it will not cope with the task. And if you take a unit that is too powerful, it is not rational, because it will not use its full potential.

Therefore, before doing anything, it is advisable to consult with experts, and even better - to take the water for analysis in the laboratory, because it may be that in addition to the hardness of the water there is a lot of undesirable substances, not always useful, which will also have to get rid of.

So why does the water get hard?

The problem is that the hardness does not depend on the state of the water system and municipal water supply. Basically, it is too hard, the natural features of the area from which the water comes, that is, the state of the ground is to blame. After all, from the way water enters the water supply station, it passes through various rocks, which contain large quantities of various mineral elements, including magnesium and calcium.

The water washes out and dissolves them, which makes them hard. And if the soil where you live contains large quantities of magnesium and calcium, the water in the tap will be hard and something must be done to soften it.

Some experts in the field of water treatment advise not to do anything with hard water, because with it in our body get the right vitamins and minerals. And if we remove them, then after a while we will lack them. In addition, installing softeners is a waste of money.

 Their opponents claim the opposite - if the water is too hard, you should do everything possible to soften it. And as for useful vitamins and minerals, you can get them with other products - it is not the same water is fed by man. But the harm from too hard water is much more than useful. So the question - what to do if the water is hard, the answer is obvious - of course, soften.


Injection of hard water on the skin.

Unpleasant consequences can occur when bathing and taking a bath or shower in hard water. The interaction of any detergent (soap, shower gel, shampoo, washing powder) with hard water results in foamy "soapy slags". First, it leads to significant (two or more times) overspending of detergents.

And secondly, these "soap slags" after drying leave plaque on your bath, shower stall, freshly washed laundry, as well as skin and hair. The unpleasant feeling of hard naughty hair is most likely familiar to you, and it is not as a shampoo...

However, the most pernicious foamy "soapy slags" formed in hard water, affect the human skin. Each time they are washed, they destroy the natural fatty film that always covers healthy human skin and clogs pores. As a result, the skin does not breathe, dryness, irritation, redness, peeling, rashes, acne, etc. appear on it. A sign of this effect can be the characteristic "creak" of freshly washed skin that occurs immediately after bathing or showering.


You can prevent skin problems and hair damage caused by hard water. Each AQUAHOMEGROUP filtered shower head has an aromatic gel cartridge with vitamin C, which removes more than 98% chlorine from tap water. When taking a shower, the gel "melts" from hot water, and Vitamin C instantly removes chlorine. The gel cartridge does not affect the water pressure from the watering can: it will remain elevated, creating a stunning massage effect.

It is easy to take care of your health - the main thing is to replace the problem in time. Our skin and hair react quickly to poor quality water. Take the water from your bath to a specialized laboratory for analysis and select a water filter for water treatment, so you won't have any problems with your skin and hair.